Licensed, insured, and local. Seamless floors, bathrooms & showers installed in 3–5 days across LA. CA License #1092421.
Call for a free quote — 310-467-0099Finding the right microcement installer in Los Angeles is the single most important decision you'll make for your project. Microcement is an artisan finish — its quality is determined almost entirely by the skill and experience of the installer. A perfectly designed bathroom with the wrong installer ends up with an uneven surface, poor adhesion, or premature cracking. A great installer transforms any space into something that looks like it belongs in an architectural magazine.
LA Microcement has been installing micro cement throughout Los Angeles since our founding. Every installation is carried out by licensed California contractors under CA License #1092421 — fully bonded and insured for your protection. We've completed hundreds of projects across Beverly Hills, Venice, Burbank, Studio City, Pacific Palisades, and every neighborhood in between.
The microcement market in Los Angeles has grown rapidly and with it the number of contractors offering the service — including many who lack the training and experience to deliver a professional result. Knowing what to look for protects your investment.
Warning signs to watch for: Unusually low prices (below $12/sqft), no license number, inability to show local project photos, promising same-day installation, or skipping the surface preparation stage. These are red flags that indicate inexperience or corner-cutting that will show up in the finished surface.
Professional microcement installation in Los Angeles is priced per square foot and varies based on the surface type, condition of the substrate, number of layers, and finish chosen. The following ranges reflect professional installation by licensed contractors — not DIY kits or inexperienced installers.
| Service | Cost per sq ft | Typical project |
|---|---|---|
| Floors | $15 – $25/sqft | $3,000 – $8,000 |
| Bathroom walls | $18 – $28/sqft | $2,500 – $6,000 |
| Shower (floor + walls) | $20 – $35/sqft | $2,800 – $5,500 |
| Full bathroom | $18 – $30/sqft | $5,000 – $12,000 |
| Kitchen countertops | $22 – $35/sqft | $2,000 – $5,000 |
Unlike tile — where a competent DIYer can achieve a reasonable result — microcement is an artisan surface that requires genuine skill. The difference between an experienced microcement installer and an inexperienced one is visible in the finished surface. Experienced installers achieve a consistency of texture and color across large surfaces that inexperienced applicators simply cannot replicate.
Surface preparation is where most failures originate. An experienced installer assesses the substrate carefully, addresses any movement, moisture issues, or adhesion problems before applying a single coat of microcement. This diagnostic stage is invisible once the job is done, but it determines whether the finish lasts two years or twenty.
Our process: Every LA Microcement installation begins with a thorough substrate assessment. We check for moisture, movement, adhesion, and any existing surface issues. Only once the surface is properly prepared and primed do we begin applying microcement — typically in three layers with full curing time between each. The result is a finish that bonds completely to the substrate and maintains its integrity for decades.
Our microcement installers work throughout greater Los Angeles. Click any area to learn more:
Free consultation, free 24hr digital rendering, no commitment required.
LA Microcement — Licensed California Contractor #1092421. Serving Los Angeles, Beverly Hills, Santa Monica, Malibu, Burbank, Studio City, Venice, Pacific Palisades and all surrounding areas.